Joshua Sutherland
Department of System Innovation, The University of Tokyo, Japan
Rui Gao
Modelon KK, Tokyo, Japan
Ladda ner artikel
http://dx.doi.org/10.3384/ecp18148187Ingår i: Proceedings of the 2nd Japanese Modelica Conference, Tokyo, Japan, May 17-18, 2018
Linköping Electronic Conference Proceedings 148:27, s. 187-194
Publicerad: 2019-02-21
ISBN: 978-91-7685-266-8
ISSN: 1650-3686 (tryckt), 1650-3740 (online)
Gearbox modelling is an important topic to the simulation community due to its difficulty in representing mixed continuous and discrete behaviour. Such kind of models also usually couple the loss of power that is dependent on the angular velocity and the
load. However, one single gearbox model with a certain fidelity cannot satisfy the broader needs of modelling during product development. In this paper, we will address hybrid modelling issues and take the gearbox model as an example to illustrate how to model gearboxes from a Systems Engineering perspective. A supervisor and supervised model structure is investigated that could also be regarded as a use case to a general cyber-physical modelling approach. The resultant model achieves the same output as the
LossyGear model in Modelica Standard Library.
Ackoff, R. L. (1971). Towards a system of systems concepts. Management Science, 17(11), 661–671.
Adcock (EIC), R. D. (2017). The Guide to the Systems Engineering Body of Knowledge (SEBoK) v. 1.9. Stevens Institute of Technology Systems Engineering Research Center, the International Council on Systems Engineering, and the Institute of Electrical and Electronics Engineers Computer Society. Retrieved from http://sebokwiki.org/wiki/Guide_to_the_Systems_Engineering_Body_of_Knowledge_(SEBoK)
Blockley, D. I., & Godfrey, P. (2000). Doing it differently: Systems for rethinking construction. Thomas Telford.
Elmqvist, H., Gaucher, F., Matsson, S. E., & Dupont, F. (2012). State machines in modelica. In Proceedings of the 9th International MODELICA Conference; September 3-5; 2012; Munich; Germany (pp. 37–46). Linköping University Electronic Press. Retrieved from http://www.ep.liu.se/ecp/076/003/ecp12076003.pdf
Elmqvist, H., Mattsson, S. E., & Otter, M. (2001). Objectoriented and hybrid modeling in modelica. Journal Européen Des Systèmes Automatisés, 35(4), 395–404.
Griffin, M. D. (2010). How do we fix System Engineering? In 61st Annual International Congress, Prague, Czech Republic (Vol. 27). International Astronautical Federation (IAF).
Hitchins, D. K. (2008). Systems engineering: a 21st century systems methodology. John Wiley & Sons. ISO/IEC. (2007). ISO/IEC 42010: 2007-Systems and software engineering–Recommended practice for architectural description of software-intensive systems. Technical report, ISO.
Otter, M., Elmqvist, H., & Mattsson, S. E. (1999). Hybrid modeling in Modelica based on the synchronous data flow principle. In Computer Aided Control System Design, 1999. Proceedings of the 1999 IEEE International Symposium on (pp. 151–157). IEEE. Retrieved from http://ieeexplore.ieee.org/abstract/document/808640/
Otter, M., Malmheden, M., Elmqvist, H., Matsson, S. E., & Johnsson, C. (2009). A new formalism for
modeling of reactive and hybrid systems. In Proceedings of the 7th International Modelica Conference; Como; Italy; 20-22 September 2009 (pp. 364–377). Linköping University Electronic Press.
Parey, A., & Tandon, N. (2003). Spur gear dynamic models including defects: A review. The Shock and Vibration Digest, 35(6), 465–478.
Pelchen, C., Schweiger, C., & Otter, M. (2002). Modeling and simulating the efficiency of gearboxes and of planetary gearboxes. In Proceedings of 2nd International Modelica Conference (pp. 257–266). Retrieved from http://elib.dlr.de/11828
Schlegel, C., Hösl, A., & Diel, S. (2009). Detailed loss modelling of vehicle gearboxes. In Proceedings of
the 7th International Modelica Conference; Como; Italy; 20-22 September 2009 (pp. 434–443). Linköping University Electronic Press. Retrieved from http://www.ep.liu.se/ecp/article.asp?issue=043&article=48
