Konferensartikel

Applying Process Integration Methods to Target for Electricity Production from Industrial Waste Heat Using Organic Rankine Cycle (ORC) Technology

Roman Hackl
Chalmers University of Technology Göteborg, Sweden

Simon Harvey
Chalmers University of Technology Göteborg, Sweden

Ladda ner artikelhttp://dx.doi.org/10.3384/ecp110571716

Ingår i: World Renewable Energy Congress - Sweden; 8-13 May; 2011; Linköping; Sweden

Linköping Electronic Conference Proceedings 57:31, s. 1716-1723

Visa mer +

Publicerad: 2011-11-03

ISBN: 978-91-7393-070-3

ISSN: 1650-3686 (tryckt), 1650-3740 (online)

Abstract

This paper presents the results of an investigation of power production from low temperature excess process heat from a chemical cluster using Organic Rankine Cycle (ORC) technology. Process simulations and process integration methods including Pinch Technology and Total Site Analysis (TSA) are used to estimate the potential for electricity production from excess heat from the cluster. Results of a previous TSA study indicate that ca. 192 MWheat of waste heat are available at 84 °C to 55 °C; a suitable temperature range for ORC applications. Process streams especially suitable for ORC power production are identified. Simulation results indicate that 14 MWheat of waste heat are available from a PE-reactor; which can be used to generate ca. 1 MWel. Costs of electricity production calculated range from 70 to 147 €/MWh depending on the cost for ORC integration. Economic risk evaluation indicates that pay-back periods lower than 4.5 years should not be expected at the electricity price and RES-E support (a European support system for renewable electricity) levels considered in this study. CO2 emission reductions of up to 5900 tonnes/year were estimated for the analysed case.

Nyckelord

Organic Rankine Cycle; Process integration; Total site analysis; Waste heat recovery

Referenser

Inga referenser tillgängliga

Citeringar i Crossref