Luís Carlos Wachholz
Horizontina, Rio Grande do Sul, Brazil
Antonio Carlos Valdiero
Panambi, Rio Grande do Sul, Brazil
Luiz Antônio Rasia
Panambi, Rio Grande do Sul, Brazil
Ladda ner artikel
http://dx.doi.org/10.3384/ecp1815640Ingår i: WIEFP2018 – 4th Workshop on Innovative Engineering for Fluid Power, November 28-30, Sao Paulo, Brazil
Linköping Electronic Conference Proceedings 156:9, s. 40-45
Publicerad: 2018-12-10
ISBN: 978-91-7685-136-4
ISSN: 1650-3686 (tryckt), 1650-3740 (online)
This work addresses the design and construction of an instrumented workbench for characterization tests of hydraulic motors. The main objective is the workbench construction for future characterization of a gerotor hydraulic motor with proportional directional valve. The gerotor hydraulic motor has as advantage to work in a situation of low rotation and high torque. The workbench must be able to identify the characteristic parameters of the dynamic model, besides the elaboration of experimental curves involving flow, pressure, rotation and torque, depending on the variation of the applied load. The workbench basically consists of a gerotor hydraulic motor, proportional valves, valve amplifier, sensors and a hydraulic power unit. The mathematical modeling of hydraulic system involved in this motor drive provides valve spool dynamics, dead zone non-linearity, valve orifice flow, pressures dynamics, static and dynamic friction and angular movement dynamics. The mathematical modeling of dynamic systems is important in machine design, because it allows predicting problems and opportunities for optimization of constructive parameters through computational simulations, which, together with experimental laboratory practices, allow the validation of the behavior of its variables in machine and equipment prototypes in conditions similar to those found in the field. Considering the experimental data to be obtained from the workbench, simulating the real operating conditions and the dynamic modeling, it will allow us a systematic analysis of the rotation, torque and pressure behavior, which allows to properly size the input parameters, identify critical points of and propose solutions. This workbench will contribute to the research and development of innovative technologies for use in proportional hydraulic systems, facilitating rotation and torque control and optimizing energy use.
Gerotor hydraulic motor, instrumented workbench, proportional valve, characteristic curves.
[1] Totten, G. E.; De Negri, V. J. . “Handbook of Hydraulic Fluid Technology”, Second Edition. 2. ed. Boca Raton, Florida: CRC Press - Taylor & Francis Group, 2011.
[2] Liu, F.; Peng X. On Application of Proportional Valve-Controlled Hydraulic Cylinder Position Servo System. Proceedings of the 34th Chinese Control Conference, 2015. Hangzhou, China.
[3] Tao, T. An Electro-Hydraulic Control System with Energy Recycling. Natural Science Foundation of Beijing - China. 2015.
[4] Furustig, J. Et al. A wear model for EHL contacts in gerotor type hydraulic motors, Journal of Mechanical Engineering Science, 2015, Vol. 229(2) 254–264.
[5] Tran, N. H., Le, C., Ngo, A. D. Experimental Investigation of Speed Control of Hydraulic Motor Using Proportional Valve. International Conference on System Science and Engineering (ICSSE), 2017.
[6] Costa, G. K., Sepehri N. Understanding overall efficiency of hydrostatic pumps and motors. International Journal of Fluid Power. 2018. doi.org/10.1080/14399776.2018.1476306.
[7] Zecchi, M. Mehdizadeh, A. Ivantysynova, M. A novel approach to predict the steady state temperature in ports and case of swash plate type axial piston machines. The 13th Scandinavian International Conference on Fluid Power, SICFP2013, June 3-5, 2013, Linköping, Sweden.
[8] Ivantysynova, M. Innovations in Pump Design – What are future directions? Proceedings of the 7th JFPS International Symposium on Fluid Power, Toyama 2008.
[9] Pahl, G. and Beitz, W. “Engineering design: a systematic approach”, London: The Design Council, 99.
[10] Valdiero, A. C., Guenther, R., Negri, V. J. New methodology for identification of the dead zone in proportional directional hydraulic valves. ABCM Symposium Series in Mechatronics. 1ed.Rio de Janeiro: ABCM Associação Brasileira de Engenharia e Ciências Mecânicas, 2006, v. 2, p. 377-384.
[11] Kumar, S., et al. Dynamic analysis of a hydro-motor drive system using priority valve. Journal of Process Mechanical Engineering, 2018. DOI: 10.1177/0954408918770470.
[12] Tao, G.; Kokotovic. P.V. Adaptive control of systems with actuator and sensor nonlinearities. Wiley. (1996).
[13] Valdiero, A. C. Modelagem Matemática de Robôs Hidráulicos. Ijuí: Ed. Unijuí, 2012.
[14] Linsingen, l. V. Fundamentos de Sistemas Hidráulicos. 5 ed. Florianópolis: UFSC, 2016.
