Konferensartikel

Modeling and simulation of fixed bed regenerators for a multi-tower decoupled advanced solar combined cycle

Iván Mesonero
IK4-TEKNIKER, Spain

Jesús Febres
IK4-TEKNIKER, Spain

Susana López Pérez
IK4-TEKNIKER, Spain

Ladda ner artikelhttp://dx.doi.org/10.3384/ecp17132847

Ingår i: Proceedings of the 12th International Modelica Conference, Prague, Czech Republic, May 15-17, 2017

Linköping Electronic Conference Proceedings 132:93, s. 847-855

Visa mer +

Publicerad: 2017-07-04

ISBN: 978-91-7685-575-1

ISSN: 1650-3686 (tryckt), 1650-3740 (online)

Abstract

Two dynamic models of fixed bed regenerators for metallic and ceramic configurations have been developed in Modelica. These models have been both worked out within CAPTURE European project and will serve as design tool for a fixed bed regenerative heat exchange system. The present article describes in detail both models and presents a case study that compares experimental and simulation results for the testing of a ceramic honeycomb regenerative matrix.

Nyckelord

Fixed bed regenerator, ceramic honeycomb, stacked wire cloths, solar Brayton cycle

Referenser

R.B. Bird et all, "Transport phenomena", Wiley, New York, 1960

F. R. Casella et all. "Standardization of Thermo-Fluid Modeling in Modelica.Fluid", Proceedings of 7th International Modelica Conference, 2009, Como, Italy S. Kakac et all, "Handbook of single-phase convective heat transfer", Wiley, New York, 1987

W.M. Kays and A.L. London, "Compact Heat Exchangers", Krieger Publishing Company, Malabar, Florida, 1998

C. Li and G.P. Peterson, "The effective thermal conductivity of wire screen", International Journal of Heat and Mass Transfer 49 (2006) 4095 -4105

W.R. Martini, "Stirling Engine Desing Manual", University Press of the Pacific, Honolulu, Hawaii, 2004

Modelica Association, "A Unified Object-Oriented Language for Physical System Modeling", 2012

K.R. Muske et all, "Model-based control of a thermal regenerator. Part 1: dynamic model", Computers and Chemical Engineering 24 (2000) 2519-2531

A. J. Organ, "The Regenerator and the Stirling Engine", Mechanical Engineering Publications Limited, London and Bury St Edmunds, UK, 1997

A. J. Organ, "Thermodynamics and Gas Dynamics of the Stirling Cycle Machine", Cambridge University Press, Cambridge, 2010

Sanders Associates Inc, Small solar electric system components demonstration final report, JPL contract 955279, Nashua, New Hampshire, August 20, 1980

A.E. Sheindlin, High temperature equipment, Hemisphere publishing Corp., Washington, 1986

J. Xu and R.A. Wirtz, "In-plane effective thermal conductivity of plain-weave screen laminates", IEEE TCPT 25 (4) (2002) 615-620

Citeringar i Crossref