Conference article

Novel Band-Pass Filter Utilizing S-shaped Slot Line Resonators

A. Deleniv
Department of Microtechnology and Nanoscience MC-2, Chalmers University of Technology, Sweden

A. Eriksson
Department of Microtechnology and Nanoscience MC-2, Chalmers University of Technology, Sweden

A. Khalabuhov
Department of Microtechnology and Nanoscience MC-2, Chalmers University of Technology, Sweden

Download article

Published in: GigaHertz 2003. Proceedings from the Seventh Symposium

Linköping Electronic Conference Proceedings 38:21, p.

Show more +

Published: 2003-11-06

ISBN:

ISSN: 1650-3686 (print), 1650-3740 (online)

Abstract

A novel band-pass filter is designed and verified experimentally. The filter consists of five Sshaped slot-line resonators; which are aligned to form an array of coupled slots. The simulated filter pass-band is centered at 1.77 GHz with 0.6% bandwidth and with an exception of small frequency shift (20MHz) shows rather good agreement with measured data. Hightemperature superconducting (YBCO) film on 1mm thick LaAlO3 substrate us used to achieve low insertion loss (-0.6dB at 77K). The filter design is based on the full-wave model of coupled slots; which enables a possibility of quick and accurate circuit simulations using the duality principle.

Keywords

No keywords available

References

[1] Yeo. M; “Practical Applications of CPW in Radar and Electronic Warfare Sub Systems”; Analysis; Design and Application of Coplanar Waveguides; IEE Colloquium on; 1993; pp.12/1-12/3.

[2] Th. Becks; B. Hopf; D. Köther; R.Kulke; P.Pogatzki; M. Rittweger; Th. Spokmann; M. Werthen; I. Wolff; “Activities on Coplanar Waveguide Structures at the IMST”; Analysis; Design and Application of Coplanar Waveguides; IEE Colloquium on; 1993; pp.5/1-5/10.

[3] P. Pogatzki; R.Kulke; Th. Spokmann; D. Köther; R. Tempel; I. Wolff; “A comprehensive evaluation of quasi-static 3D-FD calculations for more than 14 CPW structures-lines; discontinuities and lumpedelements”; Microwave Symposium Digest; 1994; IEEE MTT-S International; vol. 2; pp.1289-1292.

[4] A. Deleniv; I.Vendik; and S.Gevorgian; “Modeling Gap Discontinuity in Coplanar Waveguide Using Quasistatic Spectral Domain Method”; Int. J. RF. Microwave Computer-Aided Eng. 3; May 2000.

[5] S.Gevorgian; T. Martinsson; P.Linner; E. Kollberg; “CAD models for multilayered substrate interdigital capacitors”; IEEE Trans. Microwave Theory Tech.; vol.44; pp.896-904; June 1996.

[6] Vogt A and Jutzi W.; “An HTS narrow bandwidth coplanar shunt inductively coupled microwave bandpass filter on LaAlO3“; IEEE Trans. Microwave Theory Tech.; vol.45; pp.492-497; April 1997.

[7] R.Weigel; N.Nalezinski; A. A.Valenzuela; P.Russer; “Narrow-band YBCO Superconducting Parallel- Coupled Coplanar Waveguide Band-Pass Filters at 10GHz”; Microwave Symposium Digest; 1993; IEEE MTT-S International; pp.1285-1288.

[8] K.Yoshida; K.Sashiyama; S.Nishioka; H.Shimakage and Z.Wang; “Design and Performance of Minituarized Superconducting Coplanar Waveguide Filters”; IEEE Trans. Appl. Supercond.; vol.9; pp.3905-3908; June 1999.

[9] A.Deleniv; M.Gashinova; I. Vendik and A.Eriksson; “Design of an Interdigital Hairpin Band-Pass Filter Utilizing a Model of Coupled Slots”; IEEE Trans. Microwave Theory Tech.; vol.50; pp.2153-2158; Sept 2002.

[10] A.Deleniv; M.Gashinova and A. Eriksson; “On the Application of Duality Principle for Analysis of Slot- Like Structures”; Proceedings of EuMC 2002 (Milan; Italy); pp.9-12.

[11] Vendik I.B.; Deleniv A.N.; Sherman V.O.; Svishchev A.A.; Kondratiev V.V.; Kholodniak D.V.; Yudin P.N.; Min B.-C.; Choi Y.H.; Oh B.; ”Narrowband Y-Ba-Cu- O filter with quasi-elliptic characteristic”; IEEE Trans. Appl. Supercond.; vol.11; pp.477-480; march 2001.

[12] M.Dishal; “Aligment and adjustment of synchronously tuned multiple-resonant-circuit filters”; Proc. IRE; vol. 39; pp.1448-1455.

[13] G.Matthaei; G. Hey-Shinton; “Novel Staggered Resonator Array Superconducting 2.3 GHz Bandpass Filter”; IEEE Trans. Microwave Theory Tech.; vol.41; pp.2345-2352; Dec. 1993.

Citations in Crossref